Specifications
Model | Sterilization only | KT-23 | KT-30S | KT-30L | KT-40S | KT-40 | KT-40L |
With warm air drying | KT-23DP | KT-30SDP | KT-30LDP | KT-40SDP | KT-40DP | KT-40LDP | |
Chamber ( inner dia x depth ) | 23 ¢ X 46 cm | 30 ¢ X 45 cm | 30 ¢ X 64 cm | 40 ¢ X 50 cm | 40 ¢ X65 cm | 40 ¢ X 83 cm | |
Usable capacity | 20 L | 32 L | 45 L | 62 L | 82 L | 105 L | |
Ability | Usable max. press. | 0. 1.6 MPa ( 1.6 kg/cm² ) | |||||
Usable max. temp. | 127 ºC | ||||||
Sterilization | 110-127 ºC | ||||||
One-touch setting temp. | 110, 115, 121, 127 ºC | ||||||
Sterilization System | System | Saturated steam generated by sheathed electric heater | |||||
Main controller | Precise pressure switch | ||||||
Temp. set system | Analog temperature set on the panel of pressure switch | ||||||
Temp. indicator | Saturated steam scale on the panel of pressure gauge | ||||||
Timer | 1 ~ 60 min. ( Operates after the set temperature is reached.) | ||||||
Operation start | PUSH-ON start button switch | ||||||
Air exhaust valve | Automatic exhaust system of remained air by heat expansion bellows valve | ||||||
Water lack preventor | Automatic cut-off system by a sensitive thermostat ( Warning by buzzer and lamp ) | ||||||
Exhaust valve | Manual needle valve being opened only in required rapid exhaust Drain valve Manual ball valve ( Inner dia. : 10 mm ) | ||||||
Sterilization pattern | PUSH-ON start → Heating, Air exhaust → Sterilization → Completion buzzer → Exhaust or natural cooling | ||||||
KT-DP Models | Operation pattern with drying | PUSH-ON start → Heating, Air exhaust → Sterilization → Completion buzzer | |||||
Open DRAIN valve ( by manual ) while pressure remains → Pressure goes down to zero | |||||||
Switching from STER. to DRY ( by manual ) → Set drying time → PUSH-ON drying start → Drying | |||||||
→ Drying completion buzzer | |||||||
Drying devices | Warm air circulating and discharge by electric heater and air pump through 0.2 µm HEPA cartridge filter | ||||||
Drying temperature : 130 ºC ( changeable by inner dia l ), Timer 0 - 60 min. | |||||||
Safety | Safety devices | Water lack preventer. Saftey valve | Water lack preventer, Saftey valve | ||||
Over pressure saftey switch | |||||||
Electric safety | Breaker for over current | Breaker for over current & slight leakage | |||||
Withstand valtage : 1.500 V, 1 min. Insulation : 100 MΩ-( 500 V.D.C ) | |||||||
Safety valve operation | 0.18 MPa | ||||||
Water test pressure | 0.36 MPa | ||||||
Material | Chamber & lid | Stainless steel SUS304 shiny polished. Lid gasket : Molded silicon rubber | |||||
Outer panel | Upper surface : SUS443J 1, Main body : Steel with baked enamel, Caster ( front two with stopper ) | ||||||
Power requirement | AC 110 / 120 / 220 / 230 / 240 V, 1Ø 50/60 Hz | ||||||
( 50/60 Hz ) | 1.5 kW | 2.0 kW | 4.0 kW | ||||
Outer size WxDxH | 53 X 40 X 87 cm | 60 X 40 X 87 cm | 60 X 40 X 95 cm | 73 X 57 X 76 cm | 73 X 57 X 91c m | 73 X 57 X 109 cm | |
Weight | 35/40 kg | 49/54 kg | 53/58 kg | 67/76 kg | 72/81 kg | 86/95 kg | |
Accessories | Stainless wire basket | 21Ø x 40 cm | 27Ø x 40 cm | 27Ø x 30 cm | 38Ø x 20 cm | 38Ø x 30 cm | 38Ø x 40 cm |
( except KT-DP models ) | 1 pc | 1 pc | 2 pcs | 2 pcs | 2 pcs | 2 pcs | |
Tank & hose | Exhaust drain receiver tank | Exhaust drain receiver tank Stainless drain hose | |||||
KT-DP models | Stainless drain hose ( Stainless wire basket : option ) | ||||||