รายละเอียดสินค้า เครื่องเขย่า - Thermo Barnstead
The MaxQ 7000 is easy to drain and disinfect with the front-access drain system and quick disconnect. Twin baffles minimize splashing and turbulence in the chamber. Choice of stainless-steel or Plexiglas* cover minimizes evaporation and heat loss.
-
Temperature range of 5°C above ambient to 90°C with use of stainless steel covers
-
Monitor and control chamber temperature range with ±0.2°C accuracy at 37°C in flask
-
View speed, time and temperature simultaneously on three separate displays
-
Triple eccentric drive handles heavy loads, uniform agitation and continuous 24-hr. operation, even at high speeds
-
Easy access drain system with quick disconnect is located in the front of the cabinet for convenience in draining and disinfecting the system
-
Low-level water alarm alerts operator
-
Overtemperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails
-
Optional cooling coil extends the range of applications to near and below ambient
-
Holds 11 x 13 in. platform which must be ordered separately
Analog Model
-
Variable speed control from 40 to 400rpm controlled by a rotary dial monitored accurately by a traditional tachometer
-
Integrated tachometer monitors and displays speed in rpm to guarantee an accurate setting
-
Easy-to-read LED digital temperature display
-
Continuous mode or set timer from 1 to 60 min.
Digital Model
-
Speed range: 15 to 500rpm, ±1rpm
-
Continuous and timed operation from 0.1 hr. up to 999 hr. or 0.1 min. to 999 min.
-
Shaker shutdown and audible/visual alarms signal if unit operates ±10% of set speed, preventing shaker from walking
-
Visual/audible signals alert to temperature deviations and low water levels; heat turns off if temperature deviates ±1°C of setpoint
-
User-adjustable speed calibration can be performed using a digital handheld tachometer
-
Unbalanced load sensor stops platform motion when excess vibration is detected; visual/audible alarms signal until condition is corrected
-
Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
-
Solid-state DC brushless motor is maintenance-free
-
Retains parameters during power failure and restarts automatically after power is restored
Ordering Alerts: For a complete system, order platforms and clamps (sold separately).
Required Accessories: Universal Platform (without clamps) or Dedicated Platform (with pre-installed clamps). Clamps. See attached brochure for more details.
Warranty and Service Offering: Five-year warranty on parts, one year labor and lifetime on drive mechanism.
Certifications: CE, UL, cUL
Recommended for:
-
Bacterial suspensions
-
Cell culture
-
Diagnostic tests
-
Extraction procedures
-
General mixing
-
Hybridization
-
Solubility studies
-
Staining and destaining
-
Washing procedures
Specifications |
Temperature Range |
5°C above ambient to 65°C |
Temperature Accuracy |
±0.2°C accuracy at 37°C in flask |
Motor |
Triple eccentric drive |
Orbit |
0.5 in. (1.27cm) |
Platform L x W |
11 x 13 in. (27.9 x 33cm) |
Platform Load Capacity |
35 lb. (15.9kg) |
Overall L x W x H |
25 x 21.5 x 18 in. (63.5 x 54.6 x 45.7cm) |
Shipping Weight |
107 lb. (48.5kg) |
Cat. No. |
Type |
Speed Range |
Temperature Range and Accuracy |
Electrical Reqts. |
SHKA7000 |
Analog |
40 to 400rpm |
5°C above ambient to 65°C |
120V 50/60Hz |
SHKA7000-1CE |
Analog |
40 to 400rpm |
5°C above ambient to 65°C |
240V 50/60Hz |
SHKE7000 |
Digital |
15 to 500rpm ±1rpm |
5°C above ambient to 65°C |
120V 50/60Hz |
SHKE7000-1CE |
Digital |
15 to 500rpm ±1rpm |
5°C above ambient to 65°C |
240V 50/60Hz |
รีวิว (2)
Customer
10/12/2560 13:51
คุณภาพสินค้าดีมาก
Customer
10/12/2560 13:51
คุณภาพสินค้าดีมาก