Sterilization: All the parts of the liquid circuit of BIO DILUTOR are autoclavable. Removal and reinstalling this liquid circuit takes only few seconds. The syringe remains in its holder, protected, during these operations.
Contamination free: Fulfill all the requirements to perform dilutions without cross contamination between samples. The samples are retained in the tip or straw, and rinsed down completely with the solventAccuracy: The BIO DILUTOR incorporates a step by step motor enabling very accurate dilutions.
Syringe volume: | 10, 5, 2.5 or 1ml autoclavable |
Maximum flow speed: | 4 ml/s with 10 ml syringe |
Minimum volume step: | 1/1000 of the total volume of syringe |
Use of disposable tip: | Programmed from the beginning of process |
Air bubble volume: | Programmable |
Sample volume: | Programmable. Limited to the tip volume (1300 µl) |
Min. sample volume: | 1% of the syringe volume used. Warning message if it is less than 5% |
Dilution factor: | Programmable from 1:1 to 1: 1000 |
Reproducibility: | Better than 1% even for dilutions using more than one single syringe stroke |
Printer communication: | Serial RS 232, programmable. |
Mains: | 100/240 V, 50/60Hz |
Power: | 40W |
Dimensions (WxHxD): | 30x30x20cm / 11.8x11.8x7.8 in |
Weight: | 6 Kg / 13.2 lb. |
For Advanced only |
|
Balance communication: | Serial RS 232, programmable. |
Gravimetric dilution: | By specific weight of solvent |
Linked programs: | Up to 9 |
Specifications subject to change without notice |
This website uses cookies (Learn more) and has a privacy policy (Learn more).