จรัญเอสโซซิเอทส์ (Charan Associates)

อ่างน้ำควบคุมอุณหภูมิแบบน้ำหมุนวน - Clifton

฿0.00
Can be affected by restrictions in circulating liquids such as height, pipe length and bore.Pump capacity 10 litres/minute.Pump pressure with a liquid temperatu
เหลือ 0 ชิ้น
  • หมวดหมู่ : อ่่างน้ำควบคุมอุณหภูมิ / Water Bath
  • รหัสสินค้า : 000603

รายละเอียดสินค้า อ่างน้ำควบคุมอุณหภูมิแบบน้ำหมุนวน - Clifton

 

  • Can be affected by restrictions in circulating liquids such as height, pipe length and bore.
  • Pump capacity 10 litres/minute.
  • Pump pressure with a liquid temperature of 20°C = 1.5m head / 150mbar / 15kPa.
  • Liquid level in water bath - information.

  • Minimum liquid level - 165mm.
  • Maximum liquid level - 175mm.
  • 'Working' Liquid level, with false base/shelf in bottom water bath - information.

  • Minimum liquid level - 130mm above the top of the false base/shelf.
  • Maximum liquid level - 150mm above the top of the false base/shelf.
  • For shallow liquid levels refer to accessories below - RS4 Raised shelves.
  • Timer - information.

  • Display resolution 1 minute.
  • Setting variable, 00hrs.01mins – 99hrs.59mins.
  • Time cycle activated @ set point.
  • Timer ends with audible buzzer and "end" message.
  • Accessory - information.

  • Details below for options and recommendations.
  • For operation at temperatures below ambient to -20°C accessory Immersion Cooler DC2-300 is necessary - accessories below.
  • Above 60°C or below room temperatures it is recommended that to achieve optimum performance the bath should be covered with Lid or polypropylene spheres - accessories below.
  •  

  • Uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data.
  • Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
  • To verify the performance of the temperature control system digital display units undergo a factory calibration procedure which calculates the temperature values over the operating range of the equipment from 2 reference calibration points.
  • 20. . Powder painted body providing a durable finish and protection against corrosion and now featuring “active anti-bacterial technology”. This paint finish actively inhibits bacterial growth improving hygiene requirements as demanded by many clinical and laboratory environments. Hygienic coatings are part of a controlled approach to cleaner facilities. The Clifton range has always featured easy to wipe clean smooth paint finishes that are resistant to routine and efficient disinfection’s, however this improved coating featuring ‘active anti-bacterial’ properties provides an extra layer of defence. This new anti-bacterial paint finish is effective against major strains of bacterium including E-coli and Staphylococcus aureus, resistant strain. Within its formulation an active ingredient is a proven anti-bacterial agent bound into the coating during application and curing to the product. The efficacy of the paint finish applied to the Clifton range is maintained over time, as the anti-bacterial agent is integral within the paint finish.

     

    19. Carries the CE mark meeting the requirements of Low Voltage and EMC Directives.

    Product Name :

    NE4-56P 

    Product Description :

    56 Litre Circulator Digital water Bath.  

    Nominal Tank Capacity :

    56 Litres

    Size selector :

    «Smaller  Larger»56

    Product Specification :

    Digital water bath Circulators designed for external circulation of temperature-controlled water in a closed circuit and maintaining a stable temperature environment in the water bath.

    Thermocirculator

    • Durable stainless steel construction, painted surfaces are powder painted with tough Anti-bacterial finish with good chemical resistance.
    • Controls are easy to wipe clean and have an Anti-bacterial finish.
    • Immersed components are corrosion resistant.
    • Quiet running in use and providing excellent water movement in bath.
    • Powerful circulation pump with a capacity 10 litres per min.
    • Pump pressure with a liquid temperature of 20°C = 1.5m head / 150mbar / 15kPa.
    • Convenient push-fit and lock fittings on both inlet and outlet ports on all Clifton Circulators for secure external water circulation.
    • Push and lock fitting on inlet and outlet ports take 4mm bore x 6mm o/d tubing.
    • Suitable applications: Immersion of samples in bath and the External circulation of liquids in a closed circuit.
    Control options

    • Temperature control only
    • Temperature and time
    Precision temperature control - accurately controlled and set values reproduce able every time using advanced adaptive PID control.

    • Digital 4 digit bold LED display and setting to 0.1°C resolution.
    • Temperature range ambient +5°C - 99°C [range extendable to -20°C with accessory cooling DC1-300].
    • Sensitivity ±0.1°C.
    • Uniformity ±0.01°C.
    • Actual water bath liquid temperature always displayed for complete assurance.
    • Auto setting Under and Over temperature alarms protect your work about set temperature.
    • Time or temperature displayed.
    • Features menu driven data entry.
    • Clearly visible LED display suiting all lighting conditions.
    • Settings retained in memory.
    • Factory pre-set two point calibration on every unit.
    Timer function

    • Display resolution 1 minute
    • Setting variable, 00hrs.01mins – 99hrs.59mins
    • Timer activated @ set point
    • End timed period, audible buzzer and "end" message
    Clearly visible bright status indicators

    • Indication of heating, over temperature alarm, timer and setting set points.
    Safety
    • When a low liquid level is detected in the bath a “FIL” message automatically appears, with an audible buzzer and warning indicator, heating is then suspended. Once refilled, heating is restored and temperature control resumes automatically.
    • Over and Under temperature alarm automatically set at +4°C and –4°C about set point, providing heater cut off, visual message and indicator in alarm conditions.
    • Convenient push-fit and lock fittings - for secure external liquid circulation - reduces risk tubing becoming dislodged or leaking hot or cold fluids in use.
    Water bath

    • Features a stainless steel 304 spec tank, corrosion resistant and crevice free, contained within a sturdy body zinc coated steel, powder painted exterior with a tough Anti-bacterial finish with good chemical resistance.
    • Supplied with removable stainless steel false base designed for good water circulation and water temperature stability.
    Carries the CE mark meeting the requirements of Low Voltage and EMC Directives.  

    Tank, immersed components :

    Immersed components are corrosion resistant

    Internal Dimensions :

    490w x 500d x 200h mm - working area of the bath

    External Dimensions :

    660w x 540d x 290h mm

    Temperature Range :

    Ambient +5°C - 99°C (See Notes on cooling).

    Sensitivity/temperature stability @45°C :

    ±0.2°C

    Uniformity @45°C :

    ±0.02°C

    Temperature setting/control :

    Splash proof controls/Keypad setting/Digital LED display/PID temperature control

    Temperature display resolution :

    Real time fast responding display of actual measured temperature in increments of 0.1°C.

    Heat Up Times :

     

    37°C
    40
    60°C
    80
    100°C
    150

     

    Heating/Cooling information :

    1. For cooling use 100% glycol or Lab Bath solution using DC2-300 Immersion Cooler and 56 litre tank. The DC1-300 Immersion Cooler is not suitable for this bath because of large liquid volume.

    2.Heat up times are stated from ambient 20°C.

     

    3. All temperature measurements and performance claims have been carried in ambient temperature 20°C and installed correctly with adequate ventilation.

     

    4. Using a lid is recommended

    • Reduce evaporation
    • Assist keeping samples and water free from contamination
    • Above 60°C or below ambient it is recommended that to achieve optimum performance the bath should be covered with a Lid - accessories below
    • Saves energy, reducing electricity consumption and running costs
    5. With accessory DC2-300 Immersion Dip Cooler the bath can be cooled to any temperature from ambient to -20°C. The Thermocirculator provides counter heating to control the liquid in water bath at any set temperature in this range.

     

    6. "Adaptive tune" provides instant control from start up and automatically adjusts PID values with actual temperature readings being fed into its brain until it achieves set temperature. These adjusting PID values determine heat-up rate, the load and volume of liquid producing negligible overshoot. All this happens automatically and requires no setting giving you peace of mind.

     

    Warranty Period :

    3 Years

    Safety features :

    1. When a low liquid level is detected in the bath a “FIL” message appears, with an audible buzzer and warning indicator, heating is then suspended. Once refilled, heating is restored and temperature control resumes automatically.

    2. For peace of mind protecting your work there is auto setting, Over and Under Temperature alarms, operating at +4°C and -4°C about set temperature with heater cut off, visual message and indicator.

    3. Bath is fitted with non-slip rubber feet for safety.

     

    Safety Class :

    Class 1 - Low liquid protection

    Heater Power (W) @ 220-240V :

    2000W

    Power consumption (W) @ 220-240V:

    2050W

    Voltage :

    230V models 50-60Hz

    Energy Consumption :

    1.3kWh @ 37°C for a working day.

    1.1kWh @ 60°C - lid fitted - for a working day

    1. The lower the figure, the less energy used.

    2. Data supplied for size and range comparison, guidance only.

    3. Measured consumption at set point.

    4. Please remember that the energy consumption may vary from the figures quoted, owing to factors such as its location, ventilation, ambient temperatures and loading.

     

    Drain tap fitted :

    No - accessory siphon available.

    Notes :

    Pump flow and pressure - information.

    Features and Benefits :

    1. Circulating Clifton water baths ideal for external water circulation or immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath.

    2. The stainless steel shelf/platform in the bath used for supporting flasks/bottles/racks is stable and can be easily removed and cleaned.

    3. Operates in temperature range ambient +5° to 99°C where majority of standard laboratory work is undertaken. For temperatures below ambient an Immersion Dip Cooler DC2-300 can be used - refer to accessories.

    4. Convenient push-fit and lock fittings for secure external water circulation. Tubing is connected by depressing locking ring, pushing tubing into the fitting and releasing the locking ring. No clips or clamps and its locked securely in position preventing leaks in use.

    5. Easy to read clear bold temperature display to 0.1°C resolution ensuring actual water bath liquid temperature can be easily seen at a distance across any lab and viewable from a variety of angles.

    6. Wipe clean front control panel which is chemical resistant.

    7. Quick reliable selection and attainment of desired operating temperature using PID control with Smart technology constantly tuning the Thermocirculator to the bath liquid and its load.

    8. Good water movement and temperature control provides temperature stability throughout the water bath over whole working area.

    9. Visual indication - under and over temperature alarm.

    10. Safety cut-out Float fitted - warning low liquid level.

    11. Quiet running pump operating at optimum speed for constant external water circulation.

    12. Thermocirculator is manufactured in a sturdy stainless steel case for long working life.

    13. Very reliable.

    14. Bath fitted with a 304 spec stainless steel tank providing a durable and clean appearance throughout its working life. Easy to clean tank being crevice free.

    15. Water Bath has a powder coated exterior providing a durable chemical resistance and fitted with non-slip rubber feet for safety.

    16. Built to latest safety standards and supplied with comprehensive operating instructions and Three-year warranty.

    17. Broad range of accessories available to suit wide range of applications - see accessories below.

    18. Before leaving the factory each water bath undergoes following:

     Accessories Back to top

     

     

     
     
    Cat Ref / Description
    SL4-56
    Stainless Steel Gable Lid to fit 56 Litre Stirred and Circulating Baths
    DC2-300
    Immersion Dip Cooler (ambient to -20°C)
    6870
    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
    6871
    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
    6872
    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
    6873
    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
    6900
    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
    BP0368
    Polypropylene Spheres
    TC-1
    Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer
    LB-2.5
    Lab Bath 4590 Heat Transfer Fluid
    LB-5.0
    Lab Bath 4590 Heat Transfer Fluid
    HS-1
    Push fit and lock insulated hose 1m length x 6mm dia.
    HS-2
    Push fit and lock insulated hose 2m length x 6mm dia.
    CAL
    Calibration Record