จรัญเอสโซซิเอทส์ (Charan Associates)

อ่างน้ำควบคุมอุณหภูมิ - Clifton

฿0.00
8 Litre tank requires0.34kWh @ 60°C - lid fitted - for a working day0.33kWh @ 37°C for a working day.22 Litre tank requires0.45kWh @ 60°C -
เหลือ 0 ชิ้น
  • หมวดหมู่ : อ่่างน้ำควบคุมอุณหภูมิ / Water Bath
  • รหัสสินค้า : 000594

รายละเอียดสินค้า อ่างน้ำควบคุมอุณหภูมิ - Clifton

 

  • 8 Litre tank requires
  • 0.34kWh @ 60°C - lid fitted - for a working day

      0.33kWh @ 37°C for a working day.

  • 22 Litre tank requires
  • 0.45kWh @ 60°C - lid fitted - for a working day

      0.55kWh @ 37°C for a working day.

    2. Data supplied for size and range comparison, guidance only.

    3. Measured consumption at set point.

    4. Please remember that the energy consumption may vary from the figures quoted, owing to factors such as its location, ventilation, ambient temperatures and loading.

     

  • When only one tank is required for use the second can be immobilised, a "Stby" message will appear in temperature display, all heating and control is off.
  • Uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data.
  • Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
  • To verify the performance of the temperature control system digital display units undergo a factory calibration procedure which calculates the temperature values over the operating range of the equipment from 2 reference calibration points.
  •  

    1. The lower the figure, the less energy used.

    Product Name :

    NE2D-8/22  

    Product Description :

    DuoBath 8+22 litre  

    Nominal Tank Capacity :

    small tank = 8 litres, large tank = 22 litr

    Size selector :

    «Smaller  Larger»30

    Product Specification :

    Duobath two independently controlled unstirred water baths in one space-saving unit.

    Typical applications include

    • Eliminating problems associated with water level/disturbance when placing and removing containers of different sizes.
    • Routine operation involving two different temperature and immersed depths e.g. keeping media molten in one chamber and incubation of samples in the other.
    Three shelves are supplied with the Duobath, two at conventional height and a taller one designed to accommodate bijou style bottles in a shallow depth. Using the conventional height in both chambers gives the benefit of two standard baths in one space saving unit.

    Control options

    • Temperature control only
    • Temperature and time
    Precision temperature control - accurately controlled and set values reproduce able every time using advanced adaptive PID control.

    • Digital 4 digit bold LED display and setting to 0.1°C resolution.
    • Temperature range ambient +5°C - 99°.
    • Sensitivity @ 45°C ±0.2°C.
    • Uniformity @ 45°C ±0.1°C.
    • 99°C tank effect on 30°C tank ±0.1°C.
    • Actual water bath liquid temperature always displayed for complete assurance.
    • Auto setting Under and Over temperature alarms protect your work about set temperature.
    • Time or temperature displayed.
    • Features menu driven data entry.
    • Clearly visible LED display suiting all lighting conditions.
    • Settings retained in memory.
    • Factory pre-set two point calibration on every unit.
    Timer function

    • Display resolution 1 minute
    • Setting variable, 00hrs.01mins – 99hrs.59mins
    • Timer activated @ set point
    • End timed period, audible buzzer and "end" message
    Clearly visible bright status indicators

    • Indication of heating, over temperature alarm, timer and setting set points.
    Heating

    • Heating element, safety cut-out and temperature sensors concealed underneath tank providing a totally clear 'clutter free' working area and easy to clean.
    • The heating footprint covers underside base of the tank, its low mass provides rapid energy transfer; quicker heat up times and a reduction in energy consumption with improved temperature uniformity as heat is spread over a broad area.
    Stainless steel perforated false base
    • Removable
    • Two shelves are included with an additional 100mm tall raised shelf.< li>
    • Corrosion resistant stainless steel working environment.
    Water bath construction

    • Stainless steel 304 spec tank, crevice free.
    • Body constructed from durable steel chassis, zinc coated, then painted. The paint features Antibacterial protection, hygenic coating which actively inhibits bacterial growth.
    • Side lifting handles for ease of transportation.
    • Featuring easy to "wipe clean" control panel also features Antibacterial properties, good chemical and detergent resistance.
    Carries the CE mark meeting the requirements of Low Voltage and EMC Directives.  

    Tank, immersed components :

    304 spec (18/8) stainless steel crevice free

    Internal Dimensions :

    8=240x300x150mm, 22=500x300x150mm

    External Dimensions :

    800w x 332d x 290h mm

    Temperature Range :

    Ambient +5°C - 99°C

    Sensitivity/temperature stability @45°C :

    ±0.2°C

    Uniformity @45°C :

    ±0.1°C

    Temperature setting/control :

    Antibacterial, splash proof controls/Keypad setting/Digital LED display/PID temperature control.

    Temperature display resolution :

    Real time fast responding display of actual measured temperature in increments of 0.1°C.

    Heat Up Times :

     

    37°C
    20
    60°C
    43
    100°C
    92

     

    Heating/Cooling information :

    1. Heat up times are based on largest volume tank.

    2. All temperature measurements and performance claims have been carried in ambient temperature 20°C and installed correctly.

     

    3.Using a lid is recommended

    • Reduce evaporation
    • Assist keeping samples and water free from contamination
    • Above 60°C or below ambient it is recommended that to achieve optimum performance the bath should be covered with a Lid - accessories below
    • Saves energy, reducing electricity consumption and running costs.
    4. "Adaptive tune" provides instant control from start up and automatically adjusts PID values with actual temperature readings being fed into its brain until it achieves set temperature. These adjusting PID values determine heat-up rate, the load and volume of liquid producing negligible overshoot. All this happens automatically and requires no setting giving you peace of mind.

     

    Warranty Period :

    3 Years

    Safety features :

    1. In use a Safety cut-out switch automatically monitors the heater and bath for safe operation.

    2. Over temperature alarm automatically set at +4°C about set point, providing heater cut off, visual message and indicator in alarm conditions.

    3. Bath is fitted with non-slip rubber feet for safety.

     

    Safety Class :

    Class 1 - Safety cut-out

    Heater Power (W) @ 220-240V :

    2500W

    Power consumption (W) @ 220-240V:

    2500W

    Voltage :

    120V or 230V and 50-60Hz

    Energy Consumption :

     

    Drain tap fitted :

    22 Litre Tank - Drain outlet - accessory tap can be fitted

    Packed Weight :

    18.5 kg

    Packed Dimensions :

    530 x 330 x 250mm

    Notes :

     

    Features and Benefits :

    1. Wide choice of capacities/combinations to suit variety applications.

    2. Excellent temperature stability.

    3. Minimal cross transfer of heat between chambers e.g. 100°C tank effect on adjacent 30°C tank = 0.1°C.

    4. Recessed handles for easy transportation.

    6. Individual bath temperature controls.

    7. Perforated stainless steel shelf ensuring samples are kept at optimum heating position in the water and maintain constant distance from heating elements. Each chamber has a shelf with also an additional high step version for smallest tank.

    8. Ideal for producing a stable temperature environment with actual water temperature clearly displayed for total confidence.

    9. Powder painted body providing a durable finish and protection against corrosion and now featuring “active anti-bacterial technology”. This paint finish actively inhibits bacterial growth improving hygiene requirements as demanded by many clinical and laboratory environments. Hygienic coatings are part of a controlled approach to cleaner facilities. The Clifton range has always featured easy to wipe clean smooth paint finishes that are resistant to routine and efficient disinfection’s, however this improved coating featuring ‘active anti-bacterial’ properties provides an extra layer of defence. This new anti-bacterial paint finish is effective against major strains of bacterium including E-coli and Staphylococcus aureus, resistant strain. Within its formulation an active ingredient is a proven anti-bacterial agent bound into the coating during application and curing to the product. The efficacy of the paint finish applied to the Clifton range is maintained over time, as the anti-bacterial agent is integral within the paint finish.

    10. Built to latest safety standards and supplied with comprehensive operating instructions and Three-year warranty.

    11. Broad range of accessories available to suit wide range of applications.

    12. Before leaving the factory each water bath undergoes following:

     Accessories Back to top

     

     

     
     
    Cat Ref / Description
    SL1-8
    Stainless Steel Gable Lid to fit 8 Litre Unstirred Baths
    SL1-22
    Stainless Steel Gable Lid to fit 22 and 28 Litre Unstirred Baths
    6870
    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
    6871
    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
    6872
    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
    6873
    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
    6900
    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
    BP0368
    Polypropylene Spheres
    TC-1
    Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer
    BX0688
    Drain Tap - for Water baths with serial numbers upto 75100
    BX0953
    Drain Tap - for Water baths with serial numbers greater than 75100
    CAL
    Calibration Record