จรัญเอสโซซิเอทส์ (Charan Associates)

อ่างน้ำควบคุมอุณหภูมิแบบน้ำหมุนวน - Clifton

฿0.00
Minimum liquid level - 165mm.Maximum liquid level - 175mm.'Working'
เหลือ 0 ชิ้น
  • หมวดหมู่ : อ่่างน้ำควบคุมอุณหภูมิ / Water Bath
  • รหัสสินค้า : 000600

รายละเอียดสินค้า อ่างน้ำควบคุมอุณหภูมิแบบน้ำหมุนวน - Clifton

 

 

 

  • Minimum liquid level - 165mm.
  •  

     

     

     

  • Maximum liquid level - 175mm.
  •  

     

    'Working' Liquid level, with false base/shelf in bottom water bath - information.

     

     

  • Minimum liquid level - 130mm above the top of the false base/shelf.
  •  

     

     

     

  • Maximum liquid level - 150mm above the top of the false base/shelf.
  •  

     

     

     

  • For shallow liquid levels refer to accessories below - RS4 Raised shelves.
  •  

     

    Timer - information.

     

     

  • Display resolution 1 minute.
  •  

     

     

     

  • Setting variable, 00hrs.01mins – 99hrs.59mins.
  •  

     

     

     

  • Time cycle activated @ set point.
  •  

     

     

     

  • Timer ends with audible buzzer and "end" message.
  •  

     

    Accessory - information.

     

     

  • Details below for options and recommendations.
  •  

     

     

     

  • For operation at temperatures below ambient to -20°C accessory Immersion Cooler DC1-300 or DC2-300 is necessary - accessories below.
  •  

     

     

     

  • Above 60°C or below room temperatures it is recommended that to achieve optimum performance the bath should be covered with Lid or polypropylene spheres - accessories below.
  •  

     

     

     

     

  • Uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data.
  •  

     

     

     

  • Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
  •  

     

     

     

  • To verify the performance of the temperature control system every one undergo a factory 2 point calibration procedure which calculates the temperature values over the operating range.
  •  

     

    12. Powder painted body providing a durable finish and protection against corrosion and now featuring “active anti-bacterial technology”. This paint finish actively inhibits bacterial growth improving hygiene requirements as demanded by many clinical and laboratory environments. Hygienic coatings are part of a controlled approach to cleaner facilities. The Clifton range has always featured easy to wipe clean smooth paint finishes that are resistant to routine and efficient disinfection’s, however this improved coating featuring ‘active anti-bacterial’ properties provides an extra layer of defence. This new anti-bacterial paint finish is effective against major strains of bacterium including E-coli and Staphylococcus aureus, resistant strain. Within its formulation an active ingredient is a proven anti-bacterial agent bound into the coating during application and curing to the product. The efficacy of the paint finish applied to the Clifton range is maintained over time, as the anti-bacterial agent is integral within the paint finish.

     

    Product Name :

    NE4-56D 

    Product Description :

    56 Litre Digital Stirred Bath 

    Nominal Tank Capacity :

    56 Litres

    Size selector :

    «Smaller  Larger»56

    Product Specification :

    Stirred Clifton water baths are designed for immersion of flasks/bottles/racks in a highly stable and accurate temperature environment throughout the water bath featuring digital PID temperature control.

    Thermostirrer

    • Durable stainless steel construction, painted surfaces are powder painted with tough Anti-bacterial finish with good chemical resistance.
    • Controls are easy to wipe clean and have an Anti-bacterial finish.
    • Immersed components are corrosion resistant.
    • Quiet running in use and providing excellent water movement in bath.

       

    Control options

    • Temperature control only
    • Temperature and time
    Precision temperature control - accurately controlled and set values reproduce able every time using advanced adaptive PID control.

    • Digital 4 digit bold LED display and setting to 0.1°C resolution.
    • Temperature range ambient +5°C - 99°C.
    • Sensitivity ±0.1°C.
    • Uniformity ±0.01°C.
    • Actual water bath liquid temperature always displayed for complete assurance.
    • Auto setting Under and Over temperature alarms protect your work about set temperature.
    • Time or temperature displayed.
    • Features menu driven data entry.
    • Clearly visible LED display suiting all lighting conditions.
    • Settings retained in memory.
    • Factory pre-set two point calibration on every unit.
    Timer function

    • Display resolution 1 minute
    • Setting variable, 00hrs.01mins – 99hrs.59mins
    • Timer activated @ set point
    • End timed period, audible buzzer and "end" message
    Clearly visible bright status indicators

    • Indication of heating, over temperature alarm, timer and setting set points.
    Safety
    • When a low liquid level is detected in the bath a “FIL” message automatically appears, with an audible buzzer and warning indicator, heating is then suspended. Once refilled, heating is restored and temperature control resumes automatically.
    • Over and Under temperature alarm automatically set at +4°C and –4°C about set point, providing heater cut off, visual message and indicator in alarm conditions.
    Water bath

    • Features a stainless steel 304 spec tank, corrosion resistant and crevice free, contained within a sturdy body zinc coated steel, powder painted exterior with a tough Anti-bacterial finish with good chemical resistance.
    • Supplied with removable stainless steel false base designed for good water circulation and water temperature stability.
    Carries the CE mark meeting the requirements of Low Voltage and EMC Directives.

    Tank, immersed components :

    Immersed components are corrosion resistant, water bath 304 spec (18/8) stainless steel crevice free.

    Internal Dimensions :

    490w x 500d x 200h mm [Notes area - below - information on liquid levels]

    External Dimensions :

    660w x 540d x 290h mm

    Temperature Range :

    Ambient +5°C - 99°C

    Sensitivity/temperature stability @45°C :

    ±0.1°C

    Uniformity @45°C :

    ±0.01°C

    Temperature setting/control :

    Splash proof controls with antibacterial finish/Keypad setting/Digital LED display/PID temperature control

    Temperature display resolution :

    Real time fast responding display of actual measured temperature in increments of 0.1°C.

    Heat Up Times :

     

    37°C
    40
    60°C
    80
    100°C
    150

     

    Heating/Cooling information :

    1. Above 60°C or below ambient it is recommended that to achieve optimum performance and reduce energy consumption the bath should be covered with a layer of polypropylene spheres - see accessories.

    2. With accessory DC2-300 Immersion Dip Cooler the bath can be cooled to any temperature from ambient to -20°C. The Thermostirrer provides counter heating to control the liquid in water bath at any set temperature in this range.

     

    3. All temperature measurements and performance claims have been carried in ambient temperature 20°C and installed correctly with adequate ventilation.

     

    4. Using a lid is recommended

    • Reduce evaporation
    • Assist keeping samples and water free from contamination
    • Above 60°C or below ambient it is recommended that to achieve optimum performance the bath should be covered with a Lid - accessories below
    • Saves energy, reducing electricity consumption and running costs
    5. "Adaptive tune" provides instant control from start up and automatically adjusts PID values with actual temperature readings being fed into its brain until it achieves set temperature. These adjusting PID values determine heat-up rate, the load and volume of liquid producing negligible overshoot. All this happens automatically and requires no setting giving you peace of mind.

     

    Warranty Period :

    3 Years

    Safety features :

    1. When a low liquid level is detected in the bath a “FIL” message appears, with an audible buzzer and warning indicator, heating is then suspended. Once refilled, heating is restored and temperature control resumes automatically.

    2. For peace of mind protecting your work there is auto setting, Over and Under Temperature alarms, operating at +4°C and -4°C about set temperature with heater cut off, visual message and indicator.

    3. Bath is fitted with non-slip rubber feet for safety.

     

    Safety Class :

    Class 1 - Low liquid protection

    Heater Power (W) @ 220-240V :

    2000W

    Power consumption (W) @ 220-240V:

    2050W

    Voltage :

    230V models 50-60Hz

    Energy Consumption :

    1.3kWh @ 37°C for a working day.

    1.1kWh @ 60°C - lid fitted - for a working day

    1. The lower the figure, the less energy used.

    2. Data supplied for size and range comparison, guidance only.

    3. Measured consumption at set point.

    4. Please remember that the energy consumption may vary from the figures quoted, owing to factors such as its location, ventilation, ambient temperatures and loading.

     

    Drain tap fitted :

    No - accessory siphon available.

    Notes :

    Liquid level in water bath - information.

    Features and Benefits :

    1. Stirred Clifton water bath designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath.

    2. Operates in temperature range ambient +5° to 99°C where majority of standard laboratory work is undertaken. For temperatures below ambient an Immersion Dip Cooler DC1-300 or DC2-300 can be used - refer to accessories.

    3. Easy to read bold temperature display to 0.1°C resolution with quick and reliable selection and attainment of desired temperature using PID control with Smart technology constantly tuning the Thermostirrer to the bath liquid and its load. The bold temperature display can be easily seen at a distance.

    4. Clifton Stirred baths are designed for good water movement and water temperature stability throughput the bath and provides good working area. Fitted with a removable sturdy stainless steel false base/shelf for supporting flasks/bottles/racks.

    5. Safety features include a visual indication and heater cut off when working conditions in the water bath exceed the auto setting under and over temperature alarm values. In low liquid situations a Safety cut-out Float activates, switching off the heater.

    6. Quiet running stirrer motor operating at optimum speed for maximum water movement in bath.

    7. Thermostirrer features sturdy stainless steel casing with a powder coated top, all surfaces providing a durable and chemical resistant construction, all intended for a long working life.

    8. Water bath is fitted with a 304 spec stainless steel tank being easy to clean tank and crevice free with a powder coated exterior and fitted with non-slip rubber feet for safety.

    9. Very reliable built to latest safety standards and supplied with comprehensive operating instructions and product support along with Three-year warranty.

    10. Broad range of accessories available to suit wide range of applications - accessories below.

    11. Before leaving the factory each water bath undergoes following:

     Accessories Back to top

     

     

     
     
    Cat Ref / Description
    SL4-56
    Stainless Steel Gable Lid to fit 56 Litre Stirred and Circulating Baths
    DC2-300
    Immersion Dip Cooler (ambient to -20°C)
    6870
    Stainless Steel Test Tube Rack 26 Holes x 17mm Diameter
    6871
    Stainless Steel Test Tube Rack 16 Holes x 26mm Diameter
    6872
    Stainless Steel Test Tube Rack 36 Holes x 13mm Diameter - also suitable for 1.5ml micro tubes
    6873
    Stainless Steel Test Tube Rack 18 Holes x 19mm Diameter
    6900
    Stainless Steel Test Tube Rack 12 Holes x 32mm Diameter
    BP0368
    Polypropylene Spheres
    TC-1
    Thermometer Clip Complete With Bent Stem Spirit Filled Thermometer
    BX0616
    Draining Syphon
    LB-2.5
    Lab Bath 4590 Heat Transfer Fluid
    LB-5.0
    Lab Bath 4590 Heat Transfer Fluid
    CAL
    Calibration Record