ปัมพ์แบบเข็มฉีดยา Fusion Touch - Chemyx

What's in the box

• 
  
  
  1. Fusion Touch Syringe Pump
  2. Power Cable
  3. System Manual 
  4. PC Pump Controller Software

Size / Weight

Height: 4.5 inches (114mm)
Width: 9.5 inches (241mm)
Depth: 6.5 inch (165mm)

Weight: 7lbs (3kg)

Display

4.3-inch (diagonal) wide screen touch display

Performance

All Systems: 
Accuracy: ± 0.35%
Reproducibility: ± 0.05%

Fusion 100

Flow Rate:
Minimum: (10μl syringe) 0.0001 μl/min
Maximum: (60 ml syringe) 102 ml/min
Linear Force: 35 lbs with variable force selection
Step Resolution: 0.098 microns

Fusion 200

Flow Rate:
Minimum (10μl syringe): 0.0001 μl/min
Maximum (60 ml syringe): 61 ml/min
Linear Force: 50 lbs with variable force selection
Step Resolution: 0.046 microns 

Fusion 400

Flow Rate:
Minimum (0.5 μl syringe): 2 pl/min
Maximum (10 ml syringe): 10 ml/min
Linear Force: 50 lbs with variable force selection
Step Resolution: 0.016 microns

Computer Control

Free USB 2.0 port or RS232 COM port
Windows: XP, VISTA, 7 
Mac: Mac OS X v10 or later
Linux (call for drivers and supported versions)

Ports Configuration

RS232: Straight-through D9 Female Receptacle 
USB: USB Type B Male Receptacle
TTL I/O: USB Type B Receptacle

Regulatory Compliance

CE, UL, CSA, RoHS, FCC

Power Requirements

100-240 VAC: 50/60 Hz

Atmospheric Specifications

Operating Temperature: 4°C to 40°C (40°F to 104°F)
Storage Temperature: -10°C to 70°C (14°F to 158°F)
Humidity: 20% to 80% RH, non-condensing

RS232 Cable

6 Feet Straight Through (9 pin, D9 serial)

USB Cable

6 feet: USB-A(for PC) to USB-B(for pump)

Hybrid Touchscreen and Keypad Interface -

Set any parameter through a familiar "windows" like environment and change settings from syringe ID, flow rate, volume, and delay time. Syringe dimensions can also be loaded from an internal syringe library stored on the pump. Dual entry modes allow users to wear gloves and still operate the system.

Both keypad and screen are coated with solvent-resistant PP coating for operational durability under laboratory environments.

Simple and Smart Advanced Flow Control -

The new Fusion touch syringe pump has one of the newest ARM processors, allowing it to load/save methods, control motor force, and run an array of complex flow profiles. 

Users can program in (without a PC): 
Constant flows
Variable/Punctuated flow profiles
Gradient flows 
Advanced loops
*Or mix and match in our highly flexible interface. 

Superb PC Connectivity -

With USB, RS232 and TTL standard on every pump, the Fusion Touch syringe pump has one of the most complete external interfacing abilities on the market. This system not only takes commands from PCs, it can also be controlled from PLCs and NI cards.

Commands are formatted in easy to understand ASCII text that can be sent by an array of programs from Labview, Labwindows, Visual Studio, MatLab and Hyperterminal to name a few.

Every system also comes with a free Windows-based pump controller program for easy computer control.

Spring-Loaded Syringe Clamps -

Syringes ranging from microliter to 60ml (up to 10ml Fusion 400) can be loaded on the systems.

The entire syringe infusion platform consists of precision, CNC machined aluminum with a steel skeleton under the brace. 

Modular Hardware (Fusion 200) -

10-Channel Infuse/Withdraw Rack

The Fusion 200 has an optional modular 10-channel infuse/withdraw rack. The rack is removable and can hold syringes up to 10ml.

RS232 Cable - 3 feet

Pricing: $15.00

USB Cable - 3 feet

Pricing: $12.00

Multi-Channel Rack (Fusion 200)

Pricing: $300.00

Foot Switch

Pricing: $40.00